How to clean LED dispensing dispenser
作者:点胶技术分析 日期:2017-11-01 16:59 浏览:
LED package dispenser cleaning, in the whole dispensing machine dispensing work is very important. No matter what kind of dispensing machine, what kind of dispensing machine, LED package dispenser also need regular maintenance and cleaning, then how specific cleaning? Specific steps and points to be noted. I will explain in detail, as far as possible will not appear some careless mistakes, lead to the occurrence of operation error phenomenon.
In the cleaning time, the encapsulation of LED glue dispensing machine barrel valve closed, open the dispensing work after the glue glue valve opening out onto the storage container, and then glue, a residual glue barrel of glue into the glue storage tube.
The cleaning agent into plastic barrels, start dispensing the cleaning chemicals into the dispenser and drained out from the head, this is done the cleaning work inside LED package dispensing machine, the two valve ports are closed to keep the pressure within the dispenser remained stable, can work in normal dispensing can.
External cleaning work must rely on clean cloth to scrub, if the conditions you can use for a vacuum cleaner, but some may not allow the use of dispensing machine, note specific words need to view the instructions to avoid mistakes, of course, also check each LED package point glue machine connecting part will not be loosened or important rupture, or the need for lubrication, to repair and replace to solve problems in advance. The dispensing head is removed and stored to prevent the phenomenon that the dispensing head is placed in too long time, and the impurities block the pinhole.
If all of the solution is finished, the power source of LED package dispenser can be pulled out to save the cost.
